Need help?Do you have a question about the JUKI SC-922 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | SC-922 |
| Category | Sewing Machine |
| Language | English |
Describes installing the SC-922 control box on the table for a direct-motor type machine head.
Details installing the SC-922 with a belt-drive type machine head onto the motor unit.
Explains how to attach the control box using a bracket and screws.
Covers belt distance, parallel alignment, and tension adjustment.
Describes adjusting the pulley cover for proper clearance with the belt.
Details attaching and adjusting the protecting pin and belt slip-off preventing bracket for safety.
Lists and describes various connectors on the SC-922 for machine head, operation panel, and pedal.
Shows routing cords and connecting them for belt-drive and direct-motor machine heads.
Illustrates connecting the operation panel and pedal, and bundling cords.
Shows closing the cover and connecting power switch cords for CE specifications.
Explains how to change the power supply voltage by replacing power cords and connectors.
Details power cord connection for JA specifications and changing power cord sections.
Illustrates steps to remove/install power cords and clamping plates for voltage changeover.
Continues steps for power cord installation, conduit fixing, and cover closure for voltage changeover.
Explains how to attach the connecting rod to the pedal lever for easier operation.
Details how to select the correct machine head type using the operation panel.
Describes how to adjust the machine head angle for direct-drive motors via the operation panel.
Explains basic operations like turning power on/off, pedal usage, and presser foot control.
Describes the functions of each switch and indicator on the CP-18 operation panel.
Details how to program reverse feed stitching at the start and end of sewing.
Details how to program reverse feed stitching at the start and end of sewing.
Explains how to program overlapped stitching patterns, including number of stitches and repetitions.
Explains how to program overlapped stitching patterns, including number of stitches and repetitions.
Describes how to quickly change common function settings like thread trimming and material end sensor.
Lists and explains various one-touch settable functions such as LED quantity and optical sensor settings.
Introduces production volume management, operation measuring, and bobbin counter functions.
Explains basic operation of production support modes and displays available data.
Details mode resetting operations and specific settings for production volume management.
Explains how to access and change various function settings using the operation panel.
Shows the display when the screen is locked by password and how to proceed.
Lists functions, their descriptions, setting ranges, and default indications.
Continues the list of function settings with detailed descriptions and parameters.
Continues the list of function settings.
Continues the list of function settings.
Continues the list of function settings.
Continues the list of function settings.
Provides detailed explanations for specific functions like soft-start and material edge sensor.
Continues detailed explanations of functions, including optional input/output.
Lists input function connectors, pin assignments, and initial settings.
Continues the list of input/output connectors and their pin assignments.
Guides on how to safely remove the rear cover for maintenance.
Explains the procedure for replacing a blown fuse.
Lists phenomena, causes, and corrective measures for common errors.
Provides procedures for checking error codes and lists specific error descriptions and causes.
Continues listing error codes, their causes, and items to check.
Continues listing error codes, their causes, and items to check.
Continues listing error codes, their causes, and items to check.
Continues listing error codes, their causes, and items to check.
To Next Page
