JUKI SC-810 User Manual

ENGLISH
ENGLISH

JUKI SC-810 Specifications

General

Brand	JUKI
Model	SC-810
Category	Sewing Machine
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

BEFORE OPERATION

OPERATION PRECAUTIONS

FOR SAFE OPERATION

I. SPECIFICATIONS

II. SET-UP

1. Installing the box bracket

Fix box bracket to table using supplied bolts.

2. Installing the control box

Install control box on table using bolts, washers, and nuts.

3. Attaching the connecting rod

Attach connecting rod to pedal lever for adjusted pedal stroke.

4. Connecting the cords

Connect machine head connectors to control box.

5. Setting procedure of the machine head

Select and set machine head type via operation panel.

6. Machine head list

List of machine heads with types and specifications.

7. Adjusting the machine head

Adjust machine head angle using power switch and indicator.

III. FOR THE OPERATOR

1. Operating procedure of SC-810

Step-by-step guide to operating SC-810, including power and pedal use.

2. Explanation of the operation panel

Detailed description of operation panel buttons and displays.

3. Setting for functions of SC-810

Select and specify SC-810 functions using switches and LEDs.

4. Function setting list

List of functions, settings, and reference pages.

5. Detailed explanation of selection of functions

In-depth explanation for selecting functions like soft-start and thread trimming.

6. Automatic compensation of neutral point of the pedal sensor

Compensate neutral point of pedal sensor after replacement.

7. Setting of the auto lifter function

Enable/disable auto-lifter function via control box.

8. Initialization of the setting data

Reset all function settings to standard values.

IV. MAINTENANCE

1. Replacing the fuse

Safely replace fuses (F1, F3) in the sewing machine.

2. Error codes

List of error codes, causes, and troubleshooting measures.