Need help?Do you have a question about the JUKI SC-500 and is the answer not in the manual?
General| Type | lockstitch |
|---|---|
| Stitch Length | 5 mm |
| Lubrication | Automatic |
| Motor | Servo motor |
| Lubrication System | Automatic |
Identifies and describes various safety labels and protective covers.
Settings related to stitch formation, thread management, and needle positioning.
Settings for material sensor, optional switches, and counters.
Step-by-step guide for replacing internal fuses.
Procedures for adjusting voltage settings for different power sources.
Table detailing check terminals, nominal voltage, and remarks.
Table outlining common error phenomena, causes, and fixes.
Lists common, sensor, and connector error codes with their causes and checks.
To Next Page
