– 26 –
5) When you want to advance the setting No., press
switch to advance the setting No.
When you want to return the setting No., press
switch to return the setting No.
(Caution) Keep pressing switch or switch ,
and the setting No. will advance (re-
turn) continuously.
When the setting No. is advanced (re-
turned), the contents which are before
by one (after by one) will be etemined.
So be careful when changing the Set-
ting No.
EXAMPLE) CHANGING THE FLICKER REDUC-
ING FUNCTION (SETTING No. 5)
Press switch four times to set the setting No. to “5”.
Press switch five times to change the set No. to “5”
since the current set value is displayed on LED .
(Standard : “0”)
(Caution) Keep pressing switch or switch ,
and the setting vaue can be changed
continuously.
6) When the change has been completed, press
switch or to specify the changed value.
(Caution) 1. When turning OFF the power before
performing this work, the contents
which have been changed are not
updated.
2. Press switch , and screen display
will change to the contents of next
setting No.
3. Press switch , and screen display
will change to the contents of pre-
vious setting No.
After completing the operation, turn
OFF the power, and return the front
cover to the original position.
The machine returns to the normal
operation by turning ON the power
again.
Setting No.
To Next Page
Loading...
Need help?
General
