– 15 –
Select the method to perform communication and press set key switch .
Reference : Communication method cannot be selected by downloading of program.
3 Data communication source
4 Data communication destination
Set data communication source and data communication destination in the ten key screen, or "+" or "–
" key.
(Ten key input, or "+" or "-" key input is changed according to the kind of data.)
5 Start of communication
After all settings have been completed, press communication start key switch to start communication.
When the screen returns to the communication setting screen after display of the during communication
screen, communication is completed.
(Caution) Never turn OFF the power during communication.
Motion in case of OFF cannot be guaranteed.
To Next Page
Loading...
