JUKI Union Special MFC-7406 - Operating Cautions (Cont.); Operating the Pedals

From the library of Superior Sewing Machine & Supply LLC • www.supsew.com
OPERATING CAUTIONS (CONT.):
4. During operation, do not allow head, hands or any instrument, tool etc. near handwheel, V belt and motor.
5. Do not operate your machine without the proper belt guard, sewing guards or any other protectors that have
been provided. Doing so is very dangerous.
6. Before inspecting, adjusting, cleaning, threading the head or replacing needles, turn OFF the power switch.
Make sure the flywheel on the motor has stopped, it will be kept running by inertia after turning OFF the power
switch. DO NOT depress the foot pedal while the motor is running or it will cause the machine to rotate abruptly.
7. Turn OFF the power switch when you leave your machine or in case of a power failure.
8. Do not wipe the machine surface with lacquer thinner.
OPERATING THE PEDALS:
0
0
0
A
C
D
00 0 0 I IUl!lr--- •--,1 :
1. Locate the center of drive treadle (A) to be in line with the needles.
2. Locate presser lifter pedal (B) for operator comfort and make sure
lifter
chain is unobstructed.
3. Use S-shaped hook (C) to connect presser lifter pedal chain (D) to
presser lifting lever (E). Depending on application.
8