JUKI Union Special MFC-7406 - LUBRICATION

From the library of Superior Sewing Machine & Supply LLC • www.supsew.com
LUBRICATION:
D
UPPER LEVEL
LINE
LOWER LEVEL
LINE
C
0
The oil should be between the two red lines in sight gauge (B) when the machine is at rest.
1. If oil is required remove oil cap (A).
0
2. Fill between lines (B) with Union Special Specification 175 oil (Union Special Part No. 28604R).
& CAUTION:
Do not exceed the upper red marker line. Excessive oil in the machine will result in oil
leakage and possible overheating.
3. To drain oil reservoir, remove oil drain cap (C) on the underside of the machine.
4. To ensure oil flow through machine, check oil flow window (D).
9