What to do if the return temperature is too high on Julabo Accessories?
If the return temperature of your Julabo Accessories exceeds 85°C, which is the high-temperature protection switch-off value, examine the application's dimensions. If needed, consider using a more powerful recirculating cooler.
What to do if tube breakage occurs in Julabo Accessories?
If tube breakage occurs in your Julabo Accessories, possibly due to an insufficient filling level caused by excessive bath fluid being pumped out, replace the tubing and then replenish the bath tank with the appropriate bath fluid.
What to do if Julabo Accessories recirculating cooler is operated without bath fluid?
If your Julabo Accessories recirculating cooler is running without bath fluid, or if the liquid level is too low, you should replenish the bath tank with the correct bath fluid to ensure proper operation.
General| Brand | Julabo |
|---|---|
| Model | F250 |
| Category | Air Conditioner |
| Language | English |
Details on authorized personnel for configuration, installation, maintenance, and repairs.
Information on operating conditions, fire hazards, and suitable materials for bath fluids.
Guidelines for disposing of the unit, including refrigerant and WEEE directive compliance.
Detailed technical data, ranges, capacities, and dimensions for the F250 model.
Detailed technical data, ranges, capacities, and dimensions for the F500 model.
Detailed technical data, ranges, capacities, and dimensions for the F1000 model.
Lists warning functions like excess temperature protection and low liquid level protection.
Lists materials used for parts in contact with the bath fluid for F250, F500, and F1000.
Explains the meaning of different safety symbols like DANGER, WARNING, CAUTION, and NOTICE.
Clarifies the meaning of "Note!" and "Important!" symbols used in the manual.
Provides essential safety instructions for connecting, operating, and maintaining the unit.
Instructions for lifting, transporting, and selecting an appropriate installation site.
Details on connecting tubing, required dimensions, and precautions for leaks.
Identifies and explains the controls and indicators on the F250 unit.
Identifies and explains the controls and indicators on the F500 and F1000 units.
Recommendations and cautions regarding the selection and use of bath fluids.
Safety precautions and instructions for connecting the unit to a power source.
Step-by-step guide on how to fill the unit with bath fluid.
Instructions on how to turn the unit on, start, and stop its operation.
Guide on how to adjust and set the desired operating temperature.
Details on setting and operating the timer function for timed operation.
Explanation of the AUTOSTART function and its configuration for automatic startup after power failure.
Describes the function and alarm indication for excess temperature protection.
Describes the function and alarm indication for low liquid level protection.
Instructions for safely draining the bath fluid from the unit.
Declaration of conformity with relevant EC directives.
To Next Page
