Operator responsibility – Safety instructions
6
Use
The bath can be filled with flammable materials. Fire hazard!
There might be chemical dangers depending on the bath medium used.
Observe all warnings for the used materials (bath fluids) and the respective instructions (safety
data sheets).
Insufficient ventilation may result in the formation of explosive mixtures. Only use the unit in
well ventilated areas.
Only use recommended materials (bath fluids). Only use non-acid and non corroding
materials.
When using hazardous materials or materials that could become hazardous, the operator
must affix the enclosed safety labels (1 + 2) to the front of the unit so they are highly visible:
1
Danger area. Attention! Observe instructions.
(operating manual, safety data sheet)
2
Carefully read the user information prior to beginning operation.
Particular care and attention is necessary because of the wide operating range. There are
thermal dangers: Touchable parts of the probe can be very cold. The user must attach the
enclosed safety labels to the unit so they are easily visible.
Attention:
- Note a minimum bending radius of the
probe.
- Do not touch cold probe.
To Next Page
Loading...
