Julabo MAGIO MS-310F - User Manual

112 pages

Save Page as PDF

To Next Page

Bridge-mounted circulators, circulators, refrigerated circulators

Original operating manual

1.950.1700.en.V06 12/2022

Main Page

Table of Contents3
Foreword8
About this Manual9
Original JULABO Spare Parts9
Accessories9
Warnings10
Symbols Used11
Intended Use11
Safety12
Safety Instructions12
Safety Symbols14
Safety Function14
Product Description16
Product Overview16
Function Description16
Operating and Functional Elements17
Interfaces19
Connection of Pt100 Temperature Sensor19
Stakei Output20
RS232/RS485 Interface21
Ethernet Interface22
USB-A Interface22
Analog Interfaces (Accessories)22
Alarm Output23
REG/EPROG Socket24
Standby Input24
Operating Interface25
Softkeys and Status Icons26
Explanation of Abbreviated Terms26
Alarm Messages27
Operator Messages28
Main Menu29
Adjust Safety Menu29
Menu Determine Thermodynamics29
Menu Connect Unit30
Menu Use Programmer30
Record Data Menu30
Install Unit Menu31
Settings Menu31
Unit Account Menu31
Service Menu31
Menu about31
Technical Data32
Material of Parts that Come into Contact with the Medium34
Technical Data for Refrigerated Circulators35
Bath Fluids39
Hoses40
Transport and Installation41
Transporting the Device41
Install the Device at the Operating Location42
Initial Operation43
Setup Wizard43
Mounting the Circulator43
Mount Bridge Mounted Circulator43
Mount Heating or Refrigerated Circulator44
Connect the Device to the Power Supply45
Connect Bridge Mounted or Heating Circulator45
Connect Refrigerated Circulator46
Connecting an External System47
Connect an External System with Screw Connections48
Connect an External System with Barbed Fittings49
Switch on the Device and Set the Language50
Set High Temperature Safety Function51
Fill Device52
Set up Power Supply for the Refrigerated Circulator52
Set Chiller Mode53
Set Limit Values54
Set Temperature Warning Limits54
Adjusting Setpoint Limits54
Adjusting Actual Value Limits55
Band Limit for External Control55
Setting Band Limit56
Connect External Temperature Sensor56
Operation57
Switch on the Unit57
Switch off the Unit57
Start Temperature Control Application57
Basic Settings58
Set Language58
Change Language to English58
Set Date and Time58
Activate Autostart Function59
Set Physical Units59
Unit Account59
Change Password60
Defining User-Dependent Settings60
Defining User-Independent Presets61
Log in User61
Log out User61
Lock the Device62
Set Inactivity Timer62
Reset Settings62
Record Data63
Record Measurement Data63
Reading out Blackbox Data63
Displaying Alarm Memory64
Thermodynamics64
Control Parameter64
Optimizing Temperature Curves66
Adjust Controller67
Limit Cooling Capacity and Heating Capacity67
Adjust Pump67
Remote Control Device68
Remote Control Device Using USB Interface68
Set RS232 Interface Parameters69
Remote Control Device Using RS232 Interface69
Remote Control Device Using RS485 Interface70
Set EPROG Input70
Set Actual Value Source71
Set External Setpoint Values71
Set up Actuating Variable72
Request Device Status72
Watchdog Function73
Working with the Programmer73
Setting the Timer74
Creating and Editing a Temperature Control Profile75
Import Temperature Control Profile75
Export Temperature Control Profile76
Delete Temperature Control Profile76
Profile Series Setup77
Activate Programmer77
Configure Signal Outputs78
Set up Stakei Outlet78
Configure Signal Outputs of the REG/EPROG Plug78
Configure Alarm Outputs79
Activating Stand-By Input79
Adjusting the Temperature Sensor (ATC)80
Adjust Internal Temperature Sensor80
Adjust the Internal Temperature Sensor - Multi-Point Calibration81
Adjust External Temperature Sensor81
Device Reset82
Maintenance83
Check Safety Symbols83
Check the Functionality of High Temperature Cut-Off83
Test the Low Liquid Level Safety Function83
Replace Detachable Power Cord84
Check and Replace Fuse84
Emptying85
Clean Device85
Device Storage86
Technical Service87
Warranty87
Disposal88
Device Disposal88
EC Declaration of Conformity89
Declaration of Conformity90
Appendix91
Interface Commands91
IN Commands92
OUT Commands95
Status Commands98
Status Messages99
Alarms and Warnings99
Modbus TCP/IP Register104
Data Type104
Feedback on Invalid Entries105
Function Codes105
Holding Registers106
Input Register109

Julabo MAGIO MS-310F - User Manual

Table of Contents

Julabo MAGIO MS-310F Specifications

Related product manuals

Brand	Julabo
Model	MAGIO MS-310F
Category	Laboratory Equipment
Language	English