1 Introduction
6
1.2 Typographical conventions
1.2.1 Warning signs
The symbols for Caution and Attention are used in this operating manual
under the following conditions:
1.2.2 Note symbols
1.2.3 Number types
Caution This symbol is used when there may be danger to personnel if
the instructions are ignored or not followed correctly!
Attention This symbol is used when there may be damage to equipment
or data if the instructions are ignored or not followed correctly!
Attention This symbol is used where special care is required when
handling components liable to damage through electrostatic
discharge.
Note This symbol is used when your special attention is drawn to a
remark.
abc
1
Footnote Footnotes are remarks that refer to specific points in the text.
Footnotes consist of two parts:
A marker in the text and the foot note text itself.
The markers in the text are arranged as continuous superscript
numbers.
0x0010 Hexadecimal
number
A hexadecimal number is identified by „0x“ preceding the
actual number (here: 16 decimal).
To Next Page
Loading...
