Parameters Setting options,
Default setting
Explanations
Operating lock** No lock, factory reset
block, operating block
Default setting: no lock
Factory reset block: prevents resetting on
the device and hence the removal from a
project and pairing again by unauthorised
persons. After the mains voltage returns,
the factory reset lock is deactivated for
two minutes.
Operating block: prevents normal opera-
tion on the device and hence the load
from being controlled. This block can be
used, for example, to restrict manual ac-
cess temporarily.
Operation by means of the app is still
possible. The operating lock cannot be
deactivated on the device.
** Available by update in the future: You can find notes on updates and dates at
www.jung.de/JUNGHOME
Load control settings (system insert)
Settings for automatic functions ǐ
Parameters Setting options,
Default setting
Explanations
Time programs Load status, time and
weekdays
The load status can be changed at
defined times (weekdays and time) de-
pending on the system insert.
Astro timer** Off, sunrise or sunset
Default setting: off
The astro timer shows the sunrise and
sunset times in the course of a calendar
year. Depending on the location, load
statuses can be changed with the position
of the sun, for example to switch on the
outdoor lighting at sunset and switch it off
again at sunrise.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
15 / 26
32405203 24.02.2023
J0082405203
To Next Page
Loading...