Parameters Setting options,
Default setting
Explanations
Astro timer**
time shift
0 (off) ... 120 minutes
before or after sunrise
and sunset
Default setting: off
Astro times represent the sunrise and
sunset times in the course of a calendar
year.
If you want the time program to be ex-
ecuted in the early morning before the
start of twilight or only at full brightness,
this can be implemented with the "sun-
rise" shift.
If you want the time program to be ex-
ecuted in the evening at the start of twi-
light or only at full darkness, this can be
implemented with the "sunset" shift. Dis-
places the load actuation time by the set
value.
Astro timer**
limit range
Off, earliest time, latest
time default setting: off
To narrow the time range of an astro
timer down to an earliest and/or latest ex-
ecution time.
For example, the garden lighting can be
switched off at the latest at 9:00pm even
if the sun does not set until 10:00pm.
Set location** Geographic location The astro timer in the JUNG HOME
devices needs the geographic location of
the project to calculate the sunrise or sun-
set time. The astro timer is calculated
once a week for the localised place.
** Available by update in the future: You can find notes on updates and dates at
www.jung.de/JUNGHOME
Automatic functions for load output 2 with multi-channel devices will be available by
update in the future (notes on updates at www.jung.de/JUNGHOME).
Additional settings for switch inserts Lj
Parameters Setting options,
Default setting
Explanations
Switch-on delay 0 s (off) ... 240 min
Default setting: off
Switches on the load after a switch-on
command, delayed by the value. Re-
peated switch-on commands during the
current delay do not start the delay again.
If the load has not yet been switched on
due to the delay, the load remains
switched off when a switch-off command
arrives.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
16 / 26
32405203 24.02.2023
J0082405203
To Next Page
Loading...