EasyManua.ls Logo

Jung Home - Page 17

Jung Home
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameters Setting options,
Default setting
Explanations
Switch-off delay 0 s (off) ... 240 min
Default setting: off
Switches off the load after a switch-off
command, delayed by the value. Re-
peated switch-off commands during the
current delay restart the delay time. If the
load has not yet been switched off due to
the delay when a switch-on command
comes, then the load will remain on.
Switch-off warn-
ing
Off, on
Default setting: off
If the switch-off warning is switched on,
the light is not switched off immediately
after the run-on time (load) has elapsed.
Triple flashing at an interval of
10 seconds shows that the light will be
switched off soon. The run-on time is
thereby prolonged by approx.
30 seconds. If a movement is detected by
a linked JUNG HOME sensor cover or the
load switched on again by operating an
extension or by a linked JUNG HOME op-
erating cover during the switch-off warn-
ing, the run-on time is restarted and the
light remains on.
Run-on time
(load)
0 s (off) ... 240 min
Default setting: off
Ensures that the load is switched off after
the set run-on time expires instead of re-
maining permanently switched on after a
switch-on command.
If a movement is detected by a linked
JUNG HOME sensor cover during the
run-on time or the operating cover is
switched on again by operating an exten-
sion or a linked JUNG HOME operating
cover, the run-on time is restarted and the
light remains on.
The load can be switched off early during
the current run-on time only if the "Manual
switch-off during run-on time" parameter
is set to "On" or a disabling function (con-
tinuously off) is started.
Manual switch-
off during run-
on time
Off, on
Default setting: on
If this parameter is set to "On", it will be
possible to switch off the load manually
during the current run-on time (load).
For automatic staircase lighting controlled
by JUNG HOME operating and/or sensor
covers, this parameter should be set to
"Off" to prevent the light from being
switched off by a second person.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
17 / 26
32405203 24.02.2023
J0082405203

Related product manuals