EasyManua.ls Logo

Jung Home - Additional settings for dimming;DALI inserts

Jung Home
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameters Setting options,
Default setting
Explanations
Disabling func-
tion (restraint
guidance)**
Deactivated, continu-
ously ON, continuously
OFF, for fixed time ON/
OFF
Default setting: deactiv-
ated
The disabling function switches the load
output to the desired status and blocks it
against control by the motion sensor, ex-
tension operation, time programs and
wireless control with the app and other
JUNG HOME devices. The lock applies
for an adjustable time or until the dis-
abling function is deactivated again
** Available by update in the future: You can find notes on updates and dates at
www.jung.de/JUNGHOME
Additional settings for dimming/DALI inserts Lj
Parameters Setting options,
Default setting
Explanations
Switch-on delay 0 s (off) ... 240 min
Default setting: off
Switches on the load after a switch-on
command, delayed by the value. Re-
peated switch-on commands during the
current delay do not start the delay again.
If the load has not yet been switched on
due to the delay, the load remains
switched off when a switch-off command
arrives.
Switch-off delay 0 s (off) ... 240 min
Default setting: off
Switches off the load after a switch-off
command, delayed by the value. Re-
peated switch-off commands during the
current delay restart the delay time. If the
load has not yet been switched off due to
the delay when a switch-on command
comes, then the load will remain on.
Switch-off warn-
ing
Off, on
Default setting: off
If the switch-off warning is switched on,
the light is not switched off immediately
after the run-on time (load) has elapsed.
The light is first dimmed to minimum
brightness within 30 seconds. The run-on
time is thereby prolonged by approx.
30 seconds. If, during the switch-off warn-
ing, a movement is detected by a linked
JUNG HOME sensor cover or the warning
is switched on again by operating an ex-
tension or by a linked JUNG HOME oper-
ating cover, the run-on time will be restar-
ted and the light switched back to the
switch-on brightness.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
19 / 26
32405203 24.02.2023
J0082405203

Related product manuals