11.14 EN
102
6.3 Operational Checks
WARNING!
After starting the engine, perform the following operational checks:
Procedure
• Check whether the parking brake is locked
in place.
• Turn the steering wheel as far as it will go
in both directions and test the steering.
• Test the lift/lower, tilt and if applicable the
attachment hydraulic control functions.
• Test the horn.
• Test the engine speed with the accelerator
pedal (75) over a range of speeds while
checking the freedom of movement of the pedal.
• Release the parking brake. Start driving carefully and press the parking brake (76)
to test it.
•
• Press the "F5" button to lock the parking brake.
Z When all operational checks have been performed without problems, the truck is
ready for operation.
76 75
To Next Page
Loading...
