11.14 EN
204
15 Check wheels for wear and damage. t
16 Check wheel suspension and attachment. t
17 Test starter and generator, check wires and attachment. t
18 Replace the engine discharge filter. t
19 Replace fuel filter. t
20 Replace the fuel pre-filter. t
21 Replace engine oil filter. t
22
Check V belt / multi-V belt is tensioned and check for damage.
Replace if necessary.
t
23 Replace air filter. t
24 Check air filter, replace if necessary. t
25 Check engine for noise and leakage. t
26 Replace engine oil. t
27 Check valve setting and adjust if necessary. t
28 Check engine suspension. t
29 Test water pump and the fans. t
30 Check glow plugs. t
31 Check fuel/water separator and discharge if necessary. t
32 Check drive axle for noise and leakage. t
33 Replace drive axle oil. t
34 Clean or replace transmission oil suction filter if necessary. t
Chassis and Superstructure W A B C
1 Check chassis and screw connections for damage. t
2 Check doors and/or covers. t
3 Check labels are legible and complete. t
4 Check attachment and setting function of the driver's seat. t
5 Check condition of the driver’s seat. t
6
Check engine compartment for contamination and clean if
necessary.
t
7 Check attachment of the counterweight. t
8 Check mast attachment / mounting. t
9 Check trailer coupling or tow mechanism stop. t
10
Check overhead guard and / or cab are secure and check for
damage.
t
11 Check operator mat and steps are non-slip and damage-free. t
12 Test driver's seat restraint system and check for damage. t
Travel W A B C
To Next Page
Loading...
