193
11.14 EN
4.18 Restoring the truck to service after maintenance and repairs
Procedure
• Thoroughly clean the truck, see "Lubrication Schedule" on page 158.
• Lubricate the truck according to the lubrication schedule, see "Preparing the Truck
for Operation" on page 86.
• Clean the starter battery, grease the terminals and connect the starter battery.
WARNING!
Faulty brakes can cause accidents
As soon as the truck has been started, test the brakes several times.
X
Report any defects immediately to your supervisor.
X
Tag out and decommission the faulty industrial truck.
X
Only return the truck to service when you have identified and rectified the fault.
• Start up the truck, see "Lifting and jacking up the truck safely" on page 163.
To Next Page
Loading...
