EasyManua.ls Logo

Jungheinrich DFG 690 - Adding Diesel; Fuelling

Jungheinrich DFG 690
221 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11.14 EN
52
2 Adding diesel
CAUTION!
Air in the fuel system will result in malfunctions.
X
Never allow the fuel tank to run dry.
2.1 Fuelling
WARNING!
Diesel fuel can be hazardous
X
Diesel fuel can cause irritation if it comes into contact with the skin. Rinse any
affected areas thoroughly.
X
If it comes into contact with the eyes rinse them immediately with flowing water and
call for a doctor.
X
Wear safety gloves when handling diesel fuels.
NOTE
XFuelling must always be performed in designated areas by trained and authorised
personnel.
NOTE
XCapacity: DFG 660-690 = 125 l.
XUse only diesel in accordance with DIN 590 or DIN 51628 with a cetane rating
above 51.
2.1.1 Fuelling the tank system
Procedure
Park the truck securely before fuelling,
see "Parking the truck securely" on
page 103.
Unscrew the tank cap (62).
Insert the pump nozzle into the open
tank filler neck.
Add the fuel.
Do not overfill the tank.
Tighten the cap (62) back on after
fuelling.
Fuelling is now complete.
62

Table of Contents

Related product manuals