Jungheinrich Easy Access Transponder Stand-Alone - Deleting Transponders

24
2.4.4 Deleting transponders
Requirements
– The truck is switched on, see page
24.
Procedure
• Press the key below the
"Settings"symbol (6).
• Press the key below the
"Edittransponder" symbol (11).
The set-up transponder
is requested.
• Place the set-up transponder on
thetransponder reader (4). All
transponder IDs are shown on the
display unit (3).
• Select the transponder ID to
bedeleted using the key below the
"Down selection" symbol (13).
• Press the key below the
"Delete"symbol (8).
The transponder has been deleted.
• To return to the main menu, pressthe
key below the "Back"
symbol (10).
10 13