6.1 Prior to decommissioning
Procedure
• Thoroughly clean the truck – see page 162.
• Prevent the truck from rolling away accidentally.
• Check the hydraulic oil level and replenish if necessary, see page 156.
• Apply a thin layer of oil or grease to any non-painted mechanical components.
• Lubricate the truck according to the lubrication diagram, see page 145.
• Charge the battery, see page 55.
• Disconnect and clean the battery.
• Clean the terminal screws, grease them with terminal grease and screw them into
the connection thread to prevent short circuits.
Z
In addition, follow the battery manufacturer’s instructions.
6.2 During decommissioning
NOTICE
Full discharge can damage the battery
Self-discharge can cause the battery to fully discharge. Full discharge shortens the
useful life of the battery.
u
Charge the battery at least every 2 months.
Z
Charge the battery, see page 55.
168
10.20 en-GB
To Next Page
Loading...
Need help?
General
