4.6 Travel
WARNING!
Improper travel can result in accidents
u
Do not get up from the driver’s seat during travel.
u
Do not drive the truck unless your are wearing a seat belt and the panels and
doors are properly locked.
u
Do not lean out of the truck while travelling.
u
Make sure that the travel area is clear.
u
Adapt your travel speed to the route conditions in the work area and the load.
u
Tilt the mast back and raise the fork carriage approx. 200 mm.
u
Make sure you have sufficient visibility when reversing.
Travel
Requirements
– Truck prepared for operation, see page 86.
Procedure
• Release the parking brake lever (63).
• Select the travel direction
with the travel direction switch (76).
• Select the travel speed if necessary, to do this
press the slow travel button (115).
• Raise the fork carriage approx. 200 mm.
• Tilt the mast back.
• Apply the accelerator pedal (70). The travel
speed is governed by the accelerator (70).
The truck travels in the direction selected.
90
10.20 en-GB
To Next Page
Loading...
Need help?
General
