F Industrial Truck Maintenance
1 Operational Safety and Environmental Protection
The inspections and maintenance tasks listed in chapter "Maintenance, Inspection
and Changing of Maintenance Parts Requiring Replacement" must be performed
according to the defined service intervals (see page 357).
The manufacturer recommends the replacement of the maintenance parts also listed
in chapter "Maintenance, Inspection and Changing of Maintenance Parts Requiring
Replacement" according to the specified replacement intervals (see page 357).
WARNING!
Risk of accidents and component damage
Any modification to the truck, in particular the safety mechanisms, is prohibited.
Exception: Owners should only make changes or have changes made to powered
industrial trucks if the truck manufacturer is no longer operating in the field and there
is no successor to the business; owners must however:
– Ensure that the changes to be made are planned, tested and performed by a
specialist engineer in industrial trucks taking safety into account.
– keep permanent graphic records of the plans, tests and completion of the
changes
– carry out and have authorised the respective changes to the capacity data plates,
decals and stickers as well as the operator and service manuals.
– attach permanent and clearly visible marking to the truck indicating the types of
changes made, the date of the changes and the name and address of the
organisation responsible for the work.
317
04.19 en-GB
To Next Page
Loading...
Need help?
General
