Jungheinrich ERC 214 - Page 127

8.1.9 Choose length of the new master code (4-6 digit) and add user codes
Z
The master code is factory set to a four-digit entry: If necessary, the four-digit master
code can be changed to a five or six-digit entry. Before the master code length can
be changed, all user codes must be deleted. The length of the user code (4-6 digit)
is always determined by the length of the master code.
Requirements
– To prepare the truck for operation, see page 115.
Procedure
• Delete all user codes, see page 124.
• Enter the new master code (4-6 digit), see
page 116.
• Add user codes again, see page 118.
The length of the new master code is now changed
and user codes have been added.
75
72
73
74
77
76
125
04.19 en-GB