Jungheinrich ERC 214 - Capacity Plate for Stacking, Transport and Double-Deck Operations

5.5 Capacity Plate for Stacking, Transport and Double-Deck
Operations
Z
ERC 212z-216z only
Z
For double decker option only
CAUTION!
Risk to operational stability
In order not to jeopardize the operational stability, pay attention to the weight when
transporting two pallets so that the truck does not tip over.
u
In order not to jeopardize the operational stability, the heavier pallet should always
be transported underneath.
Previous capacity plate
The double decker mode capacity plate (44) indicates the capacity Q kg of the truck
while travelling:
44
A
B
C
A= No transporting with a raised load.
B= Max. capacity for horizontal transporting XXX kg with raised support arms
without mast lift.
C= Double decker mode:
Max. lift height 1800 mm
Max. capacity for high level lifting according ZZZ.
Max. capacity for both high and low level lifting XXX kg.
35
04.19 en-GB