Jungheinrich ERC 214 - Using the Keypad

8.11 Using the Keypad
8.11.1 Switch on the truck with the access code.
Procedure
• Release the emergency disconnect switch, see
page 80.
• Enter the access code with the keypad (60).
The truck is switched on.
60
Procedure
• Press the key under the "Switch off" symbol (98) in the display unit.
• Press the Emergency Disconnect switch, see page 80.
The truck is switched off.
8.11.2 Switching off the truck
Procedure
• Press the key under the "Switch off" symbol (98) in the
display unit.
• Press the Emergency Disconnect switch, see page 80.
The truck is switched off.
98
158
04.19 en-GB