8.10.6 Displaying the Log-in Process
The use of the last different access codes is displayed during the log-in process. The
last log-in is displayed first.
Z
If multiple access codes are logged as being displayable simultaneously, the display
area can be moved by scrolling forward or back.
Requirements
– The truck is switched on, see
page 153.
Procedure
• Press the key below the "Settings"
symbol (93).
• Press the key below the "Log-in
process" symbol (102).
• Enter the set-up code using the keys
below the display unit (55).
The set-up code entered is shown as
filled-in circles.
• To scroll forward, press the button
under the "Down selection"
symbol (101) as many times as
necessary.
The display area moves: Additional
earlier log-ins are displayed.
• To scroll back, press the button under
the "Up selection" symbol (103) as
many times as necessary.
The display area moves: More recent
log-ins are displayed.
• To return to the main menu, press the
key below the "Back" symbol (97).
The log-in process is displayed.
157
04.19 en-GB
To Next Page
Loading...
