Jungheinrich ERC 214 - Page 79

Parking the truck securely
Procedure
• Park the truck on a level surface.
• Fully lower the load handler (67):
• Press the lower button (57).
• Using the tiller (5) turn the drive wheel to "forward travel".
• Switch off the truck, to do this:
• Turn the key in the key switch (11) anti-clockwise as far as it will go. Remove
the key from the key switch (11).
•
For CanCode (58), press the O key (o).
•
Press the red key on the ISM access module (o).
• Press the emergency disconnect switch (18).
• Fold in the side arms (13).
• Fold up the folding operator platform (15).
The truck is parked.
18
15
13
11
67
77
04.19 en-GB