Travelling in rider mode at a higher speed (
o
)
Requirements
– Start up the truck, see page 72
Procedure
• Swing both folding side arms (13) out.
Z
Both side arms must be folded in or folded out at all times otherwise all functions
will be deactivated (E-1926).
• Fold down and step on the operator platform (15).
• Swing the tiller (5)in to the travel zone (F).
• Push the travel switch (8) to the desired travel direction: forward (V) or reverse
(R).
Z
When the travel switch is released, it automatically returns to the neutral position.
• Control the travel speed with the travel switch (8).
The brakes are released and the truck moves in the selected direction.
NOTICE
u
Travelling is inhibited when the operator platform is vacated and the side arms are
not folded out.
u
If the operator platform is occupied and the gates are not folded out, the truck
cannot be operated at high speed.
u
If the operator platform is occupied and only one side arm is folded out, travel is
inhibited (E-1926).
u
If the travel switch is applied before the platform is loaded, travel is inhibited
(E-1908).
87
04.19 en-GB
To Next Page
Loading...
Need help?
General
