03.13 EN
174
4.9 Engine maintenance
WARNING!
Turning and hot components can cause trapping and burning hazards when the
engine is running.
When the cover is open turning and hot components are freely accessible and can
cause injury if touched.
XBefore starting work make sure that the Emergency Disconnect switch can be
reached to switch off the engine.
XDo not touch moving parts (e.g. fans, belt drives etc.) or hot surfaces.
XTruck maintenance and repair work must only be carried out by specially trained
personnel who have been authorised by the owner.
4.9.1 Starting the engine with the cover open
The engine can only be started with the cover
open in exceptional circumstances (e.g. jump
starting).
Procedure
• Switch on the ignition.
• Press the override switch (213) a single time.
• Start the engine see "Preparing the truck for
operation" on page 76.
• Switch off the engine with the Emergency
Disconnect switch (80) or the key switch (81).
213
To Next Page
Loading...
Need help?
General
