Juniper AP12 - Page 10

Table 1: AP12 Components
Component Descripon
ETH1/PSE 10/100/1000Base-T RJ-45 port
Funcons as a Class 2 Power over Ethernet (PoE) output port if you provide 802.3at PoE input on
the ETH0 port
ETH2 10/100/1000BASE-T RJ-45 port
ETH3 10/100/1000BASE-T RJ-45 port
PASS THRU Passive RJ-45 passthrough port
ETH0 + POE 10/100/1000BASE-T RJ-45 port that supports an 802.3at PoE-powered device
RESET A pinhole reset buon that you can use to reset the AP conguraon to the factory default.
Status LED A mulcolor status LED to indicate the status of the AP and to help troubleshoot issues.
5