Juniper AP12 - Page 48

Table 12: Troubleshoot AP Disconnecon Issues (Connued)
LED Color Blink Paern Issue Steps to Troubleshoot
Blinking yellow three
mes
The AP is unable to
obtain an IP address.
The AP can obtain an IP
address either through
DHCP or through a stac
conguraon.
Troubleshoong steps for
DHCP:
1. Check whether the
switch port
conguraon has the
required parameters
(such as nave VLAN
and VLAN ID)
congured.
2. Check the DHCP
server logs to verify
that leases are
available in the DHCP
pool.
3. Connect a laptop to
the switch port to
which the AP was
connected. Verify that
the laptop is able to
obtain an IP address
from the VLAN
management pool.
• If the laptop is
unable to obtain an
IP address, contact
the DHCP team to
x the DHCP pool.
You can port-
mirror the switch
port to idenfy
which step in the
43