EasyManuals Logo

Juniper CTP1000 Series Hardware Guide

Juniper CTP1000 Series
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Table 22: DB9-to-RJ45 Adapter (p/n 720-014126) Pinouts for Connecting PP833 Processor with a
PC (continued)
DB-9RJ-45
3 TXD6 RXD
4 DTR7 DSR
7 RTS8 CTS
You can connect a console (PC, Macintosh, or UNIX workstation) directly to the COM2 port on the PP310
and PP332 processors. On the PP833 processor, a console is connected using the supplied USB-to-DB9
cable (p/n 720-071594), in which the DB-9 connector has the same pinout as a standard RS-232 DTE
port. When the USB-to-DB9 cable is used in conjunction with the DB-9 adapter labelled “p/n 450-071855”
(see Figure 32 on page 67), the available RJ-45 console pinout will be the same as the console connection
on the RTM of PP332/PP310 processor.
Alternatively, if the DB-9 adapter from the bag labelled “p/n 720-056657” (see Figure 33 on page 67) is
used instead of “p/n 450-071855”, the available RJ-45 console pinout will be similar to the CTP150 console
port (and other Juniper routers). To connect the PP833 processor with the DB-9 male serial port of a PC,
additionally connect a straight RJ-45 cable with the DB-9 adapter from the bag labelled “p/n 720-056657”.
The other end of the RJ-45 cable connects to the DB-9 adapter from the bag labelled “p/n 720-014126”
(see Figure 34 on page 68). Then, you can connect the PC’s DB-9 male connector with the DB-9 adapter
“p/n 720-014126”.
66

Table of Contents

Other manuals for Juniper CTP1000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper CTP1000 Series and is the answer not in the manual?

Juniper CTP1000 Series Specifications

General IconGeneral
BrandJuniper
ModelCTP1000 Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals