EasyManua.ls Logo

Juniper SSR130 - User Manual

Juniper SSR130
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Quick Start
SSR130
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 15
Step 3: Keep Going | 16
Step 1: Begin
IN THIS SECTION
Meet the SSR130 | 2
Claim Your Device | 2
Add the Network | 4
Add an Applicaon | 6
Create a Template | 7
Create Policies | 11
Assign the Template to a Site | 13
Assign the SSR130 to a Site | 14
This guide walks you through the simple steps to get a new cloud-ready SSR130 up and running in the Juniper Mist AI
cloud portal. You can onboard a single device using your mobile phone, or one or more devices using your computer.
Once onboarded, we'll walk you through the steps to create a basic conguraon.

Other manuals for Juniper SSR130

Question and Answer IconNeed help?

Do you have a question about the Juniper SSR130 and is the answer not in the manual?

Juniper SSR130 Specifications

General IconGeneral
Product NameSSR130
Product SeriesSession Smart Router
CategoryNetwork Hardware
Operating Temperature32°F to 104°F (0°C to 40°C)
Humidity5% to 90% non-condensing
CertificationsCE, FCC, RoHS
Storage Temperature-40°F to 158°F (-40°C to 70°C)

Summary

Step 1: Begin

Meet the SSR130

Overview of the SSR130 network appliance, its features, and available models.

Claim Your Device

Procedure to add the SSR130 to your organization's WAN Edge inventory.

Add the Network

Configure the network segment the SSR will use to access applications.

Add an Application

Define applications for WAN delivery, starting with the Internet.

Create a Template

Create a WAN Edge template to configure network, LAN, and application settings.

Create Policies

Define Traffic Steering and Application Policies for user-to-application connectivity.

Assign the Template to a Site

Save and assign the WAN Edge template to the deployment site.

Assign the SSR130 to a Site

Associate the Mist-claimed SSR130 with a site for basic configuration.

Step 2: Up and Running

Install the SSR130 Hardware

Instructions for physical installation of the SSR130, including mounting and power.

Connect to the Network

Connect the SSR130 to your network after installation and powering on.

Connect your SSR130 to the Mist Cloud

Configure WAN port for ZTP and LAN port for network access.

Step 3: Keep Going

Whats Next?

Guidance on understanding SSR configuration and management.

General Information

Access SSR130 and software documentation, and release notes.

Learn with Videos

Links to video and training resources for SSR Software.

Related product manuals