Juniper SSR130 - Meet the SSR130; Claim Your Device

You'll need a Juniper Mist WAN Assurance subscripon and your login credenals for the Juniper Mist portal.
Meet the SSR130
The Juniper Networks SSR130 network appliance is part of the SSR porolio. The SSR130 features four 1 GbE ports,
two 1 GbE RJ-45/SFP combo ports, 8 GB of memory, and a 120 GB enterprise-grade solid-state drive (SSD) for storage.
The SSR130 runs the FIPS 140-2 Level 1 compliant Session Smart Router (SSR) soware, which provides secure and
resilient WAN connecvity.
The SSR130 is available in models with or without LTE support.
Claim Your Device
IN THIS SECTION
Scan the QR Code | 3
Enter the Mist Claim Code | 4
To add the SSR130 to your organizaon's WAN Edge inventory, you'll need to enter the SSR130 claim informaon into
Mist. Locate the claim label on the rear panel.
There are two ways to enter the device claim informaon into Mist. Choose the method that is best for you.
• Scan the QR code with the MistAI app
• Manually enter the claim code in Mist
2