Juniper CTP2000 Series User Manual

CTP2000 Series
Circuit to Packet Platform
Quick Start Guide
February 2017
Part Number: 530-033822
Revision 01
This document describes how to install the Juniper Networks
®
CTP2000 Series Circuit
to Packet Platform.
Contents
CTP2000 Quick Start Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 1: Prepare the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before You Unpack the Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Unpack the Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Inspect the Components and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
If You Detect or Suspect Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 2: Install the Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before You Begin Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Option: Install the Platform in Freestanding Mode . . . . . . . . . . . . . . . . . . . . . . 5
Option: Install the Platform in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Step 3: Install Modules and Other Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Module Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Protect Modules and Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Required Tools and Safety Items for Installation . . . . . . . . . . . . . . . . . . . . . . . . 7
Safety Guidelines for Installing Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Install a CTP Interface Module, Processor Module, or Clock Module . . . . . . . . 8
Install a CompactFlash Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Install a PMC Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Install SFPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 4: Connect Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cabling Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Required Tools and Wires for Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connect Management Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connect an Interface Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cable the Platform for Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1Copyright © 2019, Juniper Networks, Inc.

Juniper CTP2000 Series Specifications

General

Brand	Juniper
Model	CTP2000 Series
Category	Network Hardware
Language	English

Summary

Install the Platform

Before Installation

Freestanding Installation

Guidelines for installing the CTP2000 platform in a freestanding mode.

Rack Installation

Install Modules and Components

Protect Modules and Slots

Install Interface, Processor, or Clock Module

Step-by-step guide for installing CTP interface, processor, or clock modules.

Install CompactFlash Card

Instructions for installing or removing a CompactFlash card on specific processors.

Install PMC Module

Procedure for mounting or replacing a PMC module on the processor module.

Install SFPs

Guide on how to install small form-factor pluggable transceivers (SFPs).

Connect Cables

Connect Management Ports

Instructions for connecting the management port for out-of-band network access.

Connect Interface Module Cable

Cable Platform for Power

Procedure for connecting grounding and power cables to the CTP2000 platform.

Set Up Access to CTP Device

Console Access

How to connect and use a console terminal for device management.

Direct Access

HyperTerminal Access

SSH Access

Connecting to the device remotely using SSH after IP configuration.

Power On Device

Safety Warnings