Juniper Day One+ MX304 - Page 11

}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length ;
}
}
}
lo0 {
unit 0 {
family inet {
address address/ 32;
}
}
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop destination-IP ;
}
}
17. Commit the conguraon to acvate it on the router.
[edit]
root# commit
commit complete
[edit]
root@ host-name #
18. When you've nished conguring the router, exit conguraon mode.
[edit]
root@ host-name # exit
Exiting configuration mode
root@ host-name >
Congratulaons. The inial conguraon is complete. Remember to also congure the backup Roung Engine if
your MX304 is equipped with redundant control planes. At this point you should be able to remotely access both
of the Roung-Engines as the root user with ssh.
11