Juniper Day One+ MX304 User Manual

• SFP transceiver dust cover and QSFP transceiver dust cover
• An electrostac discharge (ESD) grounding strap
• Grounding lug (Panduit LCD6-14A-L or equivalent) and screws
What Else Do I Need?
• Someone to help you secure the router to the rack
• Phillips (+) screwdrivers, numbers 1 and 2
• Management host such as a laptop or desktop PC
• Serial-to-USB adapter (if your laptop or desktop PC doesn’t have a serial port)
• Grounding cable #6 AWG (4.11 mm²) stranded wire
Install the MX304 Router in a Four-Post Rack
Here's how to install the router in a four-post rack or a cabinet:
CAUTION: If you're installing more than one router in a rack, install them from the boom up.
CAUTION: Before front-mounng the router in a rack, have a qualied technician verify that the rack is
strong enough to support the router's weight and is adequately supported at the installaon site.
CAUTION: Liing the chassis and mounng it in a rack requires two people (one person to hold the
router in place and a second person to install the screws). A fully loaded AC-powered router weighs up
to 70.54 lb (32 kg).
1. Review the General Safety Guidelines and Warnings.
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other end to a site
ESD point.
3

Juniper Day One+ MX304 Specifications

General

Model	MX304
Category	Network Router
Operating System	Junos OS
Power Supply	Dual redundant AC or DC power supplies
Operating Temperature	0° to 40° C (32° to 104° F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing