Juniper SRX300 - Manual

1
The SRX300 Services Gateway consolidates security, routing, switching,
and WAN interfaces for small retail oces. With advanced threat mitigation
capabilities, the services gateway provides cost-eective and secure
connectivity.
With a desktop form-factor chassis, the SRX300 Services Gateway has six
1-Gigabit Ethernet ports, two 1-Gigabit Ethernet SFP ports, 1 USB 3.0 port,
Console port (RJ45 and mini-USB), 4 GB of DRAM memory, and 8 GB of
flash memory.
Package Contents
Verify that you have the following parts available:
• SRX300 Services Gateway
• RJ-45 cable with DB-9 adapter
• USB cable
• Power supply adapter
• Power cable
• Warranty and registration information
• End User License Agreement
• Quick Start Guide
How to Set Up Your SRX300 Services Gateway
Back Panel
Front Panel
Specification Value
Dimensions (D x W x H) 7.52 in. x 12.63 in. x 1.37 in.
(19.10 cm x 32.08 cm x 3.48 cm)
Chassis weight 4.38 lb (1.99 kg)
Average power consumption 24.9 W
Average heat dissipation 85 BTU/hr
Relative humidity 5% to 90%, noncondensing
g000732
Power
button
LEDs USB
port
Reset Config
button
Serial Console
port
1G
Ethernet ports
1G SFP
ports
ESD
point
Mini-USB
Console port
g000733
DC inputCable tie
holder
LockGrounding
point
NOTE: The SRX300 Services Gateway shipment package contains a
packing list. Check the parts in the shipment against the items on the
packing list. If anything is missing or damaged, contact your Juniper
Networks customer service representative.