Juniper SSG 520M

Juniper Networks SSG 520M and SSG 550M Security Policy
12
 NDRNG
The following non-approved algorithms/protocols are disabled in FIPS mode:
 RSA encryption/decryption
 DES
 MD5
 SNMP v3
Zeroization
All keys and unprotected security parameters can be individually zeroized through the Unset, Clear,
Delete, and Reset commands. Pressing the hardware reset button or issuing the unset vendor-def
CLI command will cause the zeroization of all CSPs by reseting the device configuration to the factory
default values.