Need help?Do you have a question about the Juniper SSG 500M Series and is the answer not in the manual?
General| Model | SSG 500M |
|---|---|
| Concurrent Sessions | 128, 000 |
| SFP Ports | 2 |
| Expansion Slots | 2 |
| Memory | 2 GB |
| Flash Memory | 256 MB |
| Relative Humidity | 10% to 90% non-condensing |
| Humidity | 10% to 90% non-condensing |
| Maximum Number of Users Supported | Unlimited |
| Interfaces | 8 x 10/100/1000 |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 32° to 104° F (0° to 40° C) |
| Storage Temperature | -40°C to 70°C |
Outlines the guide's structure, listing chapters, appendices, and their contents.
Explains conventions for CLI command syntax, including keywords, variables, and examples.
Details naming conventions for objects and supported character sets in ScreenOS.
Describes navigation paths and settings conventions for the WebUI.
Details the location and description of built-in ports, PIM slots, and cable connectors on the device.
Describes elements on the front panel, including LEDs, buttons, and ports.
Details components on the back panel, such as fan tray, power supply units, and grounding lug.
Covers site preparation, safety precautions, and environmental requirements before device installation.
Provides steps for rack-mounting the device, including bracket attachment and leveling.
Outlines the procedure for connecting various interface cables to the device's ports.
Explains the importance and method of grounding the device for safety and EMI compliance.
Details how to connect both AC and DC power sources to the device.
Instructs on the correct procedure for powering the device on and off.
Explains how to connect the device to untrusted and trusted networks.
Describes default interface-to-zone bindings and initial IP configuration.
Explains access methods: Console, WebUI, Telnet/SSH for configuration.
Covers admin credentials, IP addressing, hostnames, DNS, and routing.
Details cabling and configuring two devices for redundant operation.
Guides on configuring Wide Area Network (WAN) PIMs.
Explains default policies and Screen options for zone security.
Describes how to test network connectivity to the Internet.
Provides methods to reset the device to its original factory configuration.
Lists necessary tools and parts for component replacement and maintenance.
Covers installing and removing PIMs from the device.
Details procedures for removing and installing PSUs for SSG 550M.
Guides on how to upgrade the device's memory modules.
Explains how to remove and replace the air filter for cooling maintenance.
Lists physical dimensions and weight details for the SSG 500M Series devices.
Provides voltage, current, and frequency ratings for the devices.
Details operating and storage conditions like altitude, humidity, and temperature.
Lists compliance and safety certifications for the SSG 500M Series.
Describes connector types and their pinout configurations (RJ-45, DB-9).
To Next Page
