Juniper SSG320M - Security Certifications; Operating Environment

7
SSG320M SSG350M
External Flash
Additional log storage USB 1.1 USB 1.1
Event logs and alarms Yes Yes
System configuration script Yes Yes
ScreenOS Soware Yes Yes
Dimensions and Power
Dimensions (W x H x D) 17.5 x 1.8 x 15.1 in
(44.5 x 4.5 x 38.3 cm)
17.5 x 2.6 x 15.1 in
(44.5 x 6.6 x 38.3 cm)
Weight 15.0 lb (no interface modules)
6.8 kg
25.0 lb (no interface modules +
one power supply) (11.34 kg)
Rack mountable Yes, 1 RU Yes, 1.5 RU
Power supply (AC) 100-240 VAC 275 W 300 W
Average power consumption 80 W (No PIMs) 80 W (No PIMs)
Maximum power consumption 320 W 350 W
Input frequency 47-63 Hz 47-63 Hz
Maximum current consumption 100 – 240 VAC, 3.2 A – 1.3 A 100 – 240 VAC, 3.5 A – 1.5 A
Maximum Inrush current 100 – 240 VAC, 42 A – 62 A 100 – 240 VAC, 13 A – 75 A
Average heat dissipation 273 BTU (No PIMs) 273 BTU (No PIMs)
Maximum heat dissipation 1091 BTU 1195 BTU
Power supply (DC) N/A -48 to -60 VDC, 300 watts
Noise level 40.0 dB 59.2 dB
Certifications
Safety certifications CSA, TUV, CB CSA, TUV, CB
EMC certifications
FCC class A, CE class A, C-Tick, VCCI class B FCC class A, CE class A, C-Tick, VCCI class B
NEBS No Level 3
MTBF (Bellcore model) 7.2 years 6.8 years
Security Certifications
Common Criteria: EAL4 Yes (ScreenOS 6.2) Yes (ScreenOS 6.2)
FIPS 140-2: Level 2 Ye s Ye s
ICSA Firewall and VPN Ye s Ye s
Operating Environment
Operating temperature 32° to 122° F (0° to 50° C) 32° to 122° F (0° to 50° C)
Non-operating temperature -4° to 158° F (-20° to 70° C) -4° to 158° F (-20° to 70° C)
Humidity 10% to 90% noncondensing 10% to 90% noncondensing
(1) Performance, capacity and features listed are based upon systems running ScreenOS 6.3 and are the measured maximums under ideal testing conditions unless otherwise noted. Actual results
may vary based on ScreenOS release and by deployment. For a complete list of supported ScreenOS versions for SSG Series gateways, please visit the Juniper Customer Support Center (www.
juniper.net/customers/support/) and click on ScreenOS Software Downloads.
(2) IMIX stands for Internet mix and is more demanding than a single packet size as it represents a traffic mix that is more typical of a customer’s network. The IMIX traffic used is made up of 58.33%
64 byte packets + 33.33% 570 byte packets + 8.33% 1518 byte packets of UDP traffic.
(3) UTM Security features (IPS/Deep Inspection, antivirus, antispam and Web filtering) are delivered by annual subscriptions purchased separately from Juniper Networks. Annual subscriptions provide
signature updates and associated support. The high memory option is required for UTM security features.
(4) Redirect Web filtering sends traffic from the firewall to a secondary server. The redirect feature is free. However, it does require the purchase of a separate Web filtering license from either Websense
or SurfControl.
(5) NAT, PAT, policy-based NAT, virtual IP, mapped IP, virtual systems, virtual routers, VLANs, OSPF, BGP, RIPv2, Active/Active HA and IP address assignment are not available in Layer 2 transparent mode.
Juniper Networks Services and Support
Juniper Networks is the leader in performance-enabling services that are designed to accelerate, extend, and optimize your high-
performance network. Our services allow you to maximize operational efficiency while reducing costs and minimizing risk, achieving a
faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required
levels of performance, reliability, and availability. For more details, please visit www.juniper.net/us/en/products-services.
Specifications (continued)