Hangzhou Junce Instruments Co., Ltd.
Set a certain value in the setting voltage and
current box, enter the upper limit setting
function, press the OK button, the setting is
successful. After the setting is successful, when
the value is adjusted to the upper limit, the
setting area will display MAX, indicating that the
upper limit has been reached.
Set a certain value in the setting voltage and
current box, enter the lower limit setting
function, press the OK button, the setting is
successful. After the setting is finished, when
the value is adjusted to the lower limit, the
setting area will display MIN, indicating that the
lower limit has been reached.
Cancel the upper and lower limit settings.
The brightness adjustment range is from 1% to
100%.
The maximum time adjustment is 30 minutes,
and the adjustment step value is 10 seconds.
Setting 0 seconds means that the indicator light
stays on. After turning off the screen, press the
power button to turn on.
There are two languages: Chinese and English.
Restore the factory setting of the wireless
controller, but the factory setting of the power
supply cannot be restored.
Display the product model and our company's
website, you can view product information and
download materials.
Chapter 3 More Product Information
For more information about this instrument, please refer to the relevant manual by
logging in to the official website of JUNTEK (www.junteks.com) to download them.
"DPM8600 Host Computer Software" provides the host computer software related to
this product.
"DPM8600 English Manual" introduces the functions of the instrument and the
operation methods, possible failures and solution in using the instrument.
"DPM8600 Communication Protocol" provides DPM8600 product communication
protocol.
To Previous Page
