Hangzhou Junce Instruments Co., Ltd.
set voltage and current value will be directly turned on after the power is
turned on without any operation.
Button Lock Function
Pressing and holding the OK button can lock the buttons. When the
button is locked, press and hold the OK button again to cancel the button lock.
Chapter 2 Wireless Controller Instructions
The wireless controller uses 2.4G frequency radio frequency module and wirelessly
transmit signals with the power supply, which can control the power supply within a
range of up to 10 meters. The wireless controller has a built-in 3.7V, 2000mA lithium
battery, which can be recharged repeatedly. It can be used for more than 10 hours
when fully charged. The wireless controller uses a 2.4-inch TFT LCD display, with
multi-function buttons and the knob, parameters can be quickly set and adjusted, and
the operation is simple and fast..
►Note: This remote control is only compatible with DPM8605-RF, DPM8608-RF,
DPM8616-RF, DPM8624-RF, DPM8650-RF, DPM8605-485RF, DPM8608-485RF,
DPM8616-485RF, DPM8624-485RF, DPM8650-485RF models.
Product Specification
Wireless transmission method
Wireless transmission distance
Within 10 meters (no obstacles)
To Next Page
