Hangzhou Junce Instruments Co., Ltd.
adjustment or replacement especially to circuits or accessories must be
performed by JUNTEK authorized personnel.
Provide Adequate Ventilation.
Inadequate ventilation may cause an increase of temperature in the
instrument, which would cause damage to the instrument. So please keep the
instrument well ventilated and inspect the air outlet and the fan regularly.
Do Not Operate in Wet Conditions.
To avoid short circuit inside the instrument or electric shock, never operate
the instrument in a humid environment.
Do Not Operate in an Explosive Atmosphere.
To avoid personal injuries or damage to the instrument, never operate the
instrument in an explosive atmosphere.
Keep Instrument Surfaces Clean and Dry.
To avoid dust or moisture from affecting the performance of the instrument,
keep the surfaces of the instrument clean and dry.
Prevent Electrostatic Impact.
Operate the instrument in an electrostatic discharge protective environment to
avoid damage induced by static discharges. Always ground both the internal
and external conductors of cables to release static before making connections.
Use the Battery Properly.
Do not expose the battery (if available) to high temperature or fire. Keep it out
of the reach of children. Improper change of a battery (lithium battery) may
cause an explosion. Use the JUNTEK specified battery only.
Handle with Caution.
Please handle with care during transportation to avoid damage to buttons,
knobs, interfaces, and other parts on the panels.
To Next Page
Loading...
