Jupiter Pana 34 - Handling Precautions; Cleaning; Receiving and Inspecting Shipment

To Next Page

To Previous Page

Chapter 1: Read Me First

2 Pana 34 User Manual

1.2 Handling Precautions

• DO NOT PLACE THE DISPLAY FACE UP OR FACE DOWN other than in its protective foam padding

• DO NOT SHAKE THE DISPLAY

• Avoid touching the screen, except for action appropriate to using the touch features with your fingers

or stylus

• Avoid touching the screen when moving the Pana 34

1.3 Cleaning

• Do not clean the display with alcohol, solvents, or ammonia, as these could damage the display

• Never spray any liquid directly onto the screen

• Do not let any kind of liquid enter the display as it may cause electrical shock or damage

• Should the surface of the display become dirty, please wipe the surface lightly with a microfiber cloth

• If the surface requires additional cleaning, lightly moisten the cloth with deionized water as found in

“screen clean” kits

• Should there be excess dirt and/or grease buildup, use a very diluted solution of water with less than

5% dish soap (roughly less than 1 part mild dish soap to 20 parts water)

1.4 Receiving and Inspecting Shipment

The first thing you should do upon receipt of the Pana shipment is to check the shipment.

Inspection Procedure

Visually inspect the shipping container

If any damage is discovered, request immediate inspection from the carrier.

2 Unpack the Pana.

Please see Section 1.5, Unpack the Pana 34 on page 3.

3 Look for any visible damage to the screen or other parts of the Pana.

4 Look for and document any dents, scratches, or other visible signs of damage to the screen or the

enclosure. Do not remove the bottom shipping foam from the box.

5 Put the screen back in the shipping foam as it was received.

Please see Section 2.1, Attach the Stand, Camera and Monitor on page 5 for instructions about as-

sembling the stand and monitor assembly.