EasyManuals Logo

Jura A1/A100 User Manual

Jura A1/A100
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
38
4 Permanent settings in programming mode
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
The Coffee Grounds Container symbol?
lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Filter symbol! lights up.
! TTouch the Filter symbol to start rinsing of
the filter
The Y, <, > and ! symbols flash. The filter
is rinsed.
Rinsing of the filter stops automatically. The
Coffee Grounds Container symbol? lights
up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Y, < and > symbols flash, the
machine heats up. Your JURA is once more
ready for use.
Setting the water hardness
E If you are using the CLARIS Blue filter
cartridge and have activated it, there is no
need to set the water hardness.
The harder the water is, the more frequently the
JURA needs to be descaled. It is therefore impor-
tant to set the water hardness accurately.
The following water hardness settings are available:
Water hardness Symbol(s) shown in display
Level 1:
1 – 15°dH
1 symbol illuminated
Y
Level 2:
16 – 23°dH
2 symbols illuminated
Y <
Level 3:
24 – 30°dH
3 symbols illuminated
Y < >
Example:Change the water hardness setting from
‘level 2’ (Y <) to ‘level 3’ (Y < >).
Precondition:Your JURA is ready for use.
T Touch the ; and _ symbols for approxi-
mately 2 seconds.
The ;, _, &, ! and L symbols light up
brightly.
& TBriefly touch the Descaling symbol.
The &, Y and < symbols light up.
>T Touch the Coffee symbol.
The &, Y, < and > symbols light up.
& TTouch the Descaling symbol to confirm that
you want to set the water hardness to
‘level 3’.
Your JURA is once more ready for use.
Automatic switch-off
You can save energy with the automatic switch-off
function on your JURA machine. Your JURA
machine switches off automatically after the preset
time following the last action on the machine.
You can set the following times:
Switch off
after
Symbol(s) shown in display
30 min.
Symbol Y lights up
1 hr.
Symbol < lights up
2 hrs.
Symbol > lights up
Example:Change switch-off time from 30 minutes
(Y) to 1 hour (<).
Precondition:The JURA machine is ready for use.
T Touch the ; and _ symbols at the same
time for approximately 2 seconds.
The symbols ;, _, & (or !) and L and also Y
light up.
< TTouch the Espresso symbol.
The symbol < lights up.
T Touch the ; symbol for approximately
2 seconds.
The switch-off time has been changed to
1 hour. Your JURA machine is once more
ready for use.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jura A1/A100 and is the answer not in the manual?

Jura A1/A100 Specifications

General IconGeneral
BrandJura
ModelA1/A100
CategoryCoffee Maker
LanguageEnglish

Related product manuals