26
ENA 7
8 Transport and environmentally
friendly disposal
Transport / Emptying the system
Keep the packaging for your ENA. It should be
used to protect the machine during transport.
In order to protect the ENA from frost during trans-
port, the system must be emptied.
Precondition:
READY is displayed.
n T Press the Steam button.
HEATING
As soon as the ENA has heated up, READY
appears again.
l T Turn the switch anticlockwise to position m.
STEAM, hot steam is discharged from the
cappuccino frother.
T Remove and empty the water tank.
Steam will continue to be discharged until
the system is empty.
CLOSE TAP
FILL WATER TANK
Q T Press the On/Off button to switch the
machine off.
y T Turn the switch clockwise to position o.
The next time you use the machine the
E
system must be refilled (see Chapter 1
‘Preparing and using for the first time –
First-time use’).
Disposal
Please dispose of old machines in an environmen-
tally friendly way.
H
Old machines contain valuable, recyclable materi-
als which should be recycled. Please therefore
dispose of old machines via suitable collection
systems.
9 Technical data
Voltage 220–240 V ~, 50 Hz
Power 1450 W
Safety test
S
Energy consumption
ECONOMY -
Approx. 13.5 Wh
Energy consumption
ECONOMY p
Approx. 4 Wh
Pump pressure Static, max. 15 bar
Holding capacity of
water tank
1.1 l
Holding capacity of
bean container
125 g
Holding capacity of
coffee grounds
container
Approx. 10 servings
Cable length Approx. 1.1 m
Weight Approx. 9.3 kg
Dimensions
(W × H × D)
23.8 × 36 × 44.5 cm
To Next Page
Loading...
