EasyManua.ls Logo

Jura ENA Micro 9 One Touch - 6 Display Messages 28 en

Jura ENA Micro 9 One Touch
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
6 Display messages
6 Display messages
Message Cause/Result Action
FILL WATER
TANK
The water tank is empty or
not correctly inserted. You
cannot prepare any products.
T Fill the water tank (see Chapter 1 ‘Preparing and
using for the first time – Filling the water tank’).
T Insert the water tank.
EMPTY
GROUNDS
The coffee grounds container
is full. No specialty coffees can
be prepared, but hot water
preparation is possible.
T Empty the coffee grounds container and the
drip tray (see Chapter 3 ‘Daily operation – Daily
maintenance’).
TRAY
MISSING
The drip tray is not inserted
correctly or is not inserted at
all. You cannot prepare any
products.
T Insert the drip tray.
FILL BEANS
The bean container is empty.
No specialty coffees can be
prepared, but hot water
preparation is possible.
T Fill the bean container (see Chapter 1 ‘Preparing
and using for the first time – Filling the bean
container’).
CLOSE
COVER
The aroma preservation cover
for the bean container is not
fitted or not fitted correctly.
T Fit the aroma preservation cover correctly.
PRESS
RINSE
The ENA is prompting you to
perform a rinse or continue a
maintenance program that
was already started.
T Press the Maintenance button to start the rinse
or to continue the maintenance program.
CAPPUCCINO
RINSE
The ENA requests a cappuc-
cino rinse.
T Press the Maintenance button to start
cappuccino frother rinsing.
READY /
CLEAN
The ENA is prompting you to
clean it.
T Perform cleaning (see Chapter 5 ‘Maintenance
Cleaning the machine’).
READY /
DE-SCALE
The ENA is prompting you to
descale it.
T Perform descaling (see Chapter 5 ‘Maintenance –
Descaling the machine ’).
READY /
FILTER
After 2000 oz (60 liters) of
water have flowed through
the CLEARYL Blue filter
cartridge, it will cease to work.
T Replace the CLEARYL Blue filter cartridge (see
Chapter 5 ‘Maintenance – Changing the filter’).
NOT ENOUGH
POWDER
There is insufficient ground
coffee in the machine; the
ENA stops the operation.
T The next time you prepare a beverage, add
more ground coffee (see Chapter 2 ‘Preparation –
Ground coffee’).
TOO HOT
The system is too hot to start
a maintenance program.
T Wait for several minutes until the system has
cooled or prepare a specialty coffee or hot water.

Other manuals for Jura ENA Micro 9 One Touch

Related product manuals