21
3 Daily operation
To ensure that you get many years of reliable service out of your X10
and to guarantee the optimum coffee quality, the machine requires
daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
E Always empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
E The insert for the drip tray, including the drip tray itself, and
the coffee grounds container are dishwasher-safe.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Clean the milk system in the dual spout (see Chapter 5
‘Maintenance – Cleaning the milk system’).
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the dual spout (see Chapter 5 ‘Mainte-
nance – Dismantling and rinsing the dual spout’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
E To clean the display, you can disable it under ‘Maintenance
status’ / ‘Lock display’.
You will find more information about caring for your X10 in program-
ming mode under ‘Maintenance status’ / ‘Maintenance informa-
tion’.
Carry out the following maintenance actions regularly or as
required:
U
In the interests of hygiene, we recommend changing the milk
pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialised dealers. Your X10 is equipped with the HP3
milk system.
Daily maintenance
Regular maintenance
To Next Page
Loading...
Need help?
General
Weight and Dimensions
